MR2 SW20
Parts for the 1990-1999 Toyota MR2
sw20-fuel-5sfe
91-95 5sfe SW20 Fuel Line
We took our popular fuel line for the 20v 4age and made it for the 91-95 5SFE powered SW20. The line we chose to use is the -6 or 3/8" ID hose. This allows plenty of fuel to keep your engine happy. All lines are stainless steel braided teflon lined fuel line. They are rated at 2450psi working and 9800psi burst pressure. This line is also compatible with both gasoline and E85. The -6 is larger than the stock line, even for the turbo engines. Which means more fuel. Also the adapters have been desi
$139.99
sw20-fuel-beams-3sge
BEAMS 3sge SW20 Fuel Line
We took our popular fuel line for the 20v 4age and made it for the BEAMS 3sge powered SW20. The line we chose to use is the -6 or 3/8" ID hose. This allows plenty of fuel to keep your engine happy. All lines are stainless steel braided teflon lined fuel line. They are rated at 2450psi working and 9800psi burst pressure. This line is also compatible with both gasoline and E85. The -6 is larger than the stock line, even for the turbo engines. Which means more fuel. Also the adapters have been desi
$159.99
mr2-coolant-bleed-hoses
Coolant Bleed Hoses
Have your stock coolant bleed hoses gotten brittle and turned brown? Or worse yet have you lost them altogether? This will fix all that. We have put together a matching set of proper length and proper sized hoses to match OEM quality. These lines are crystal clear so you can see the coolant level when bleeding your car. These kits come with instructions on how to properly use the hoses and do a proper bleed. Don't do the "jack the rear up" bleed job any more! Order a set of these hoses today!
$16.99
mr2-coolant-bleed-hoses
Coolant Bleed Hoses
Have your stock coolant bleed hoses gotten brittle and turned brown? Or worse yet have you lost them altogether? This will fix all that. We have put together a matching set of proper length and proper sized hoses to match OEM quality. These lines are crystal clear so you can see the coolant level when bleeding your car. These kits come with instructions on how to properly use the hoses and do a proper bleed. Don't do the "jack the rear up" bleed job any more! Order a set of these hoses today!
$16.99
mkii-clutch-line
Custom SW20 Stainless Steel Braided Clutch Line
The ultimate in custom clutch lines for your SW20. These lines are fully braided stainless steel lines with an inner teflon line. We also use the same fittings that Toyota originally used so you can be assured the lines are meant for your application. Each line is pressure tested to 3000psi to ensure they will hold up. One nice feature of these lines, and what sets them apart from the other run of the mill clutch lines, is the availability of different colors. All of our lines are available in a
$64.99
sw20-fuel-gen2-3sge
Gen2 3sge SW20 Fuel Line
We took our popular fuel line for the 20v 4age and made it for the Gen2 3sge powered SW20. The line we chose to use is the -6 or 3/8" ID hose. This allows plenty of fuel to keep your engine happy. All lines are stainless steel braided teflon lined fuel line. They are rated at 2450psi working and 9800psi burst pressure. This line is also compatible with both gasoline and E85. The -6 is larger than the stock line, even for the turbo engines. Which means more fuel. Also the adapters have been desig
$139.99
sw20-fuel-gen2-3sgte
Gen2 3sgte SW20 Fuel Line
We took our popular fuel line for the 20v 4age and made it for the Gen2 3sgte powered SW20. The line we chose to use is the -6 or 3/8" ID hose. This allows plenty of fuel to keep your engine happy. All lines are stainless steel braided teflon lined fuel line. They are rated at 2450psi working and 9800psi burst pressure. This line is also compatible with both gasoline and E85. The -6 is larger than the stock line, even for the turbo engines. Which means more fuel. Also the adapters have been desi
$149.99
sw20-fuel-gen3-3sgte
Gen3 3sgte SW20 Fuel Line
We took our popular fuel line for the 20v 4age and made it for the Gen3 3sgte powered SW20. The line we chose to use is the -6 or 3/8" ID hose. This allows plenty of fuel to keep your engine happy. All lines are stainless steel braided teflon lined fuel line. They are rated at 2450psi working and 9800psi burst pressure. This line is also compatible with both gasoline and E85. The -6 is larger than the stock line, even for the turbo engines. Which means more fuel. Also the adapters have been desi
$159.99
sw20-fuel-gen4
Gen4 3sgte SW20 Fuel Line
We took our popular fuel line for the 20v 4age and made it for the Gen4 3sgte powered SW20. The line we chose to use is the -6 or 3/8" ID hose. This allows plenty of fuel to keep your engine happy. All lines are stainless steel braided teflon lined fuel line. They are rated at 2450psi working and 9800psi burst pressure. This line is also compatible with both gasoline and E85. The -6 is larger than the stock line, even for the turbo engines. Which means more fuel. Also the adapters have been desi
$145.99
mkii-brakelines
MKII MR2 High Performance Brakeline Kit
All of our High Performance Brake line kits are race-bred street brake lines and are constructed from the finest quality hose, consisting of a PTFE inner hose covered by braided stainless steel. The braided stainless steel is then covered by a protective plastic sheathing. In addition to providing a more responsive and firm brake pedal by eliminating the “spongy” feel that often accompanies stock rubber brake lines, High Performance Brake lines are abrasion and corrosion resistant to stay good l
$149.99
sw20-frunk-prop
SW20 Front Trunk Lid Gas Charged Prop Kit - Black
We have searched high and low to bring to market a more cost effective solution to those already on the market. This kit replaces the stock prop rod with two gas charged hydraulic prop rods, one on either side of the car. This allows the front trunk lid to power itself up once a little past halfway. This is great for show cars and those of us that usually open the front trunk while we have our hands full! This kit comes with everything you need to install on any 91-95 SW20. Installation typic
$149.99
sw20-frunk-prop-stainless
SW20 Front Trunk Lid Gas Charged Prop Kit - Stainless
Want something a with a more custom touch than our regular black Front Trunk Lid Gas Charged Prop Rod kits? This kit is what you want! It replaces the stock prop rod with two STAINLESS STEEL gas charged hydraulic prop rods, one on either side of the car. This allows the front trunk lid to power itself up once a little past halfway. This is great for show cars and those of us that usually open the front trunk while we have our hands full! This kit comes with everything you need to install on a
$179.99
sw20-engine-prop-black
SW20 Gas charged engine lid prop - Black
This is our gas charged engine lid prop for the SW20 chassis. It fits either side and comes with all needed hardware for a fast install. Are you tired of the stock prop rod clip breaking. This will fix that and give you extra room to work on or look at your engine! The gas charged prop is compact to allow maximum room around the engine bay. Also it fits both NA and Turbo models on either driver or passenger side for ultimate flexibility. You can also install one on both sides of the engine lid i
$74.99
sw20-engine-prop-stainless
SW20 Gas charged engine lid prop - Stainless
This is our STAINLESS gas charged engine lid prop for the SW20 chassis. It fits either side and comes with all needed hardware for a fast install. Are you tired of the stock prop rod clip breaking? Do you want to dress up the engine bay some more? This is what you need! This kit will give you extra room to work on your engine while dressing up the engine bay at the same time! The gas charged prop is compact to allow maximum room around the engine bay. Also it fits both NA and Turbo models on eit
$99.99
sw20-return-line
SW20 Stainless Steel Braided Fuel Return Line
This is our long awaited Stainless Steel Braided Fuel Return line that compliments our fuel feed lines. These lines are the same as our Stainless Braided Fuel Feed lines with the exception being they have a rubber inner core rather than teflon. Having the rubber inner core allows us to use the stock 1/4" push type line that comes as factory on many cars. Also the rubber will seal against this metal press fitting where our teflon inner core lines would not. These lines are E85 compatible.
$49.99