MR2 AW11

aw11-16v-vac-kit

AW11 16v 4age Custom Vacuum Line Kit

This is our custom vacuum line kit for the 16v 4age. You can choose the kit to fit either the 85/86 or 87+. We also have an option for those of you wanting to replace even the cruise control vacuum lines and/or a/c idle up lines. This kit will replace every vacuum line on the engine, including those under the intake, thus eliminating the possibility of a vacuum leak due to a cracked/dry rotted line. If you have ever had to trace down a vacuum leak this is the kit for you. We have already

16v-aw11-fuel

AW11 16v 4age Fuel Line

This is our custom line that replaces the AW11's old, probably close to failing, fuel line. We took the same material used to create our popular 20v AW11 and 20v AE86 fuel line and created this line. It is compatible with both unleaded and e85 fuels. The line is a -6 which is larger than the stock line, thus better flow. We only use crimp style fittings. None of that crap screw-on type here. Available in the following colors: Red, Blue, Black, and Clear. *NOTE* If you have a pulse damp

20v-aw11-fuel

AW11 20v 4age Fuel Line

This is the solution to the problem that we AW11 owners run into with the 20v 4age swap. In order to make the fuel line fit properly you have to extend the stock one. This is usually done by cutting the 16v rail end off and splicing the 20v end on to the line from the filter. This can cause issues with leakage of fuel. That is a very dangerous proposition. This line fixes that problem. It is a stainless steel braided line that is teflon lined. It is rated for fuel usage and will stand the rig

aw11-20v-coolant-line-kit

AW11 20v Custom Coolant Line Kit

This is our long awaited custom coolant line kit for the AW11 20v engine swap. The kit is a direct bolt on using the stock oil cooler routing to help keep the routing simple and out of the way of too much exhaust heat. We utilize the stock fill neck for simplicity and easy access to replacement pressure caps. This kit solves the problem of custom lines for the feed line to the head. The stock return line on the transmission is reused. The silicon hose used is top quality. The specs are: Ma

aw11-20v-vac-kit

AW11 20v Custom Vacuum Line Kit

This is our custom vacuum line kit for the 20v 4age. You can choose the kit to fit either the Blacktop or Silvertop. We also have an option for those of you using the Silvertop with Blacktop electronics. This kit will replace every vacuum line on the engine, including those under the ITB's, thus eliminating the possibility of a vacuum leak due to a cracked/dry rotted line. If you have ever had to trace down a vacuum leak this is the kit for you. We have already cut the lines to size and

aw11-4agze-vac-kit

AW11 4agze Custom Vacuum Line Kit

This is our custom vacuum line kit for the supercharged 4agze in the AW11 MR2. This kit will replace every vacuum line on the engine, including those on the supercharger, thus eliminating the possibility of a vacuum leak due to a cracked/dry rotted line. If you have ever had to trace down a vacuum leak this is the kit for you. This is only the bulk silicon to replace the stock rubber lines on your 4agze. This is not a pre-cut kit. We have yet to have had a 4agze in the shop long enough to

aw11-engine-prop-black

AW11 Gas charged engine lid prop - Black

This is our gas charged engine lid prop for the AW11 chassis. It comes with all needed hardware for a fast install. Are you tired of the stock prop rod. Once the plastic bushing breaks you constantly have to find the rod! This will fix that and give you extra room to work on or look at your engine! The gas charged prop is compact to allow maximum room around the engine bay. Also it fits both NA and Supercharged models. *This has been confirmed to fit with rear strut tower bars. Installation

aw11-engine-prop-stainless

AW11 Gas charged engine lid prop - Stainless

This is our STAINLESS gas charged engine lid prop for the AW11 chassis. It comes with all needed hardware for a fast install. Are you tired of the stock prop rod. Once the plastic bushing breaks you constantly have to find the rod! This will fix that and give you extra room to work on or look at your engine! The gas charged prop is compact to allow maximum room around the engine bay. Also it fits both NA and Supercharged models. *This has been confirmed to fit with rear strut tower bars.

aw11-oil-cooler-delete

AW11 Oil cooler deletion kit

This is our oil cooler deletion kit. This will replace the ugly and often leaking stock oil cooler in the AW11 MR2. The kit comes with everything you need to replace the stock oil cooler, including all silicon bends and non-perforated clamps. This will help clean up your engine bay not only by replacing the ugly stock oil cooler but by getting rid of that oil leak waiting to happen (if it hasn't already!). *NOTE* These kits are made to order. Please allow 7-10 business days for production bef

16v-sc-aw11-fuel

AW11 S/C 4agze Fuel Line

This is our custom line that replaces the Supercharged AW11's old, probably close to failing, fuel line. We took the same material used to create our popular 20v AW11 and 20v AE86 fuel line and created this line. It is compatible with both unleaded and e85 fuels. The line is a -6 which is larger than the stock line, thus better flow. This is a must have if you are running larger than stock injectors and/or higher than stock boost levels. We only use crimp style fittings. None of that crap scr

mr2-coolant-bleed-hoses

Coolant Bleed Hoses

Have your stock coolant bleed hoses gotten brittle and turned brown? Or worse yet have you lost them altogether? This will fix all that. We have put together a matching set of proper length and proper sized hoses to match OEM quality. These lines are crystal clear so you can see the coolant level when bleeding your car. These kits come with instructions on how to properly use the hoses and do a proper bleed. Don't do the "jack the rear up" bleed job any more! Order a set of these hoses today!

mr2-coolant-bleed-hoses

Coolant Bleed Hoses

Have your stock coolant bleed hoses gotten brittle and turned brown? Or worse yet have you lost them altogether? This will fix all that. We have put together a matching set of proper length and proper sized hoses to match OEM quality. These lines are crystal clear so you can see the coolant level when bleeding your car. These kits come with instructions on how to properly use the hoses and do a proper bleed. Don't do the "jack the rear up" bleed job any more! Order a set of these hoses today!

mki-clutch-line

Custom AW11 Stainless Steel Braided Clutch Line

The ultimate in custom clutch lines for your AW11. These lines are fully braided stainless steel lines with an inner teflon line. We also use the same fittings that Toyota originally used so you can be assured the lines are meant for your application. Each line is pressure tested to 3000psi to ensure they will hold up. One nice feature of these lines, and what sets them apart from the other run of the mill clutch lines, is the availability of different colors. These lines are available in plain

mki-front-rotors-85_86-oem

MKI MR2 Brake Rotors - Front set 85/86

mki-front-rotors-87-up-oem

MKI MR2 Brake Rotors - Front set 87+

mki-rear-rotors-85_86-oem

MKI MR2 Brake Rotors - Rear set 85/86

mki-rear-rotors-87-up-oem

MKI MR2 Brake Rotors - Rear set 87+

mki-brakelines

MKI MR2 High Performance Brakeline Kit

All of our High Performance Brake line kits are race-bred street brake lines and are constructed from the finest quality hose, consisting of a PTFE inner hose covered by braided stainless steel. The braided stainless steel is then covered by a protective plastic sheathing. In addition to providing a more responsive and firm brake pedal by eliminating the “spongy” feel that often accompanies stock rubber brake lines, High Performance Brake lines are abrasion and corrosion resistant to stay good l

mki-front-brakes-oem

MKI MR2 OEM Front brake pad

Don't need full race compound pads? Just want to restore the OEM braking quality to your car without it costing an arm and a leg? These are the pads for you. Semi-Metallic pads with low dust and squeal that fit any budget. If you need new brakes, what's stopping you?

mki-rear-brakes-oem

MKI MR2 OEM Rear brake pad

Don't need full race compound pads? Just want to restore the OEM braking quality to your car without it costing an arm and a leg? These are the pads for you. Semi-Metallic pads with low dust and squeal that fit any budget. If you need new brakes, what's stopping you?